thrust roller bearings
Thrust bearings are designed to accommodate axial load in one or both directions. The single acting carries the load in one direction while the double acting can carry the load in both directions. There are several design types and configurations for thrust bearings to suit a variety of load capacities and applications. The Ball Thrust series is available in the ABMA Inch series, ISO Metric series, and Angular Contact series. The single acting Inch and Metric series are capable of handling relatively light loads in one direction while the Angular Contact series can handle a combination of radial and thrust loads in one or both directions. The Cylindrical Roller Thrust series is produced in Inch, Metric, Self-Aligning, Crane Hook, and Specialty series, Single and Double Acting. The use of the cylindrical roller design allows for greater thrust load capacities than the same sized ball thrust bearing. This greater capacity makes thrust bearings suitable for a wide range of applications and industries. Our Tapered Roller Thrust Bearings with high load capacities are suitable for many applications where heavy thrust loads are encountered in the application.
- Timken NTH-3460 thrust roller bearings
- 571.5 mm
- 749.3 mm
- NBS K81134TN thrust roller bearings
- 100.0000 mm
- 55.000 mm
- FAG 293/500-E-MB thrust roller bearings
- 3300 rpm
- 2.00 mm
- 300 mm x 395 mm x 35 mm IKO CRB 50050 thrust roller bearings
- 16 lb
- 38.1000 mm
- SNR 23218EAKW33 thrust roller bearings
- 60 mm
- 104 mm
- 140 mm x 240 mm x 20,5 mm SKF 89328M thrust roller bearings
- 1220 kN
- 332 mm
- INA 89316-TV thrust roller bearings
- 691 kN
- 41.275 mm
- SKF GS 81138 thrust roller bearings
- 140 r/min
- 1950 mm
- Timken 100TPS144 thrust roller bearings
- 835 kN
- 1 mm
- NKE 293/530-M thrust roller bearings
- 0.3125 in
- 3.5000 in
- NBS K81126TN thrust roller bearings
- 110.0000 mm
- 27.00 mm
