angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
- 300 mm x 460 mm x 74 mm ISB 7060 A angular contact ball bearings
- SMITH BEARING
- 0.0
- 38,892 mm x 77,762 mm x 19,710 mm NTN SX0860LLU angular contact ball bearings
- Ball Bearing
- Phenolic
- Toyana 7005 C-UO angular contact ball bearings
- 6018.2ZR.C3
- 8482.10.50.68
- 100 mm x 180 mm x 34 mm NACHI 7220 angular contact ball bearings
- 0.0
- Double Cone
- Toyana 7314 A-UX angular contact ball bearings
- N/A
- With Pilot
- 17 mm x 40 mm x 17,5 mm CYSD 3203 angular contact ball bearings
- 2 Bolt Pillow Block
- M06110
- 35 mm x 72 mm x 26,97 mm Timken 5207KG angular contact ball bearings
- 35 mm x 72 mm x 26,97 mm
- 50 mm x 80 mm x 16 mm KOYO 3NC 7010 FT angular contact ball bearings
- Mounted Units &
- TIMKEN
- Toyana 7320 C angular contact ball bearings
- Open
- Steel
