angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
- 17 mm x 47 mm x 22,2 mm ZEN S3303 angular contact ball bearings
- Flange Block Bearing
- 4.125 Inch | 104.78
- 34,976 mm x 72,04 mm x 33 mm SNR GB40714 angular contact ball bearings
- 13560 N
- Double Sealed
- 304,8 mm x 342,9 mm x 19,05 mm KOYO KFX120 angular contact ball bearings
- PEER BEARING CO.
- 0
- 75 mm x 115 mm x 20 mm CYSD 7015DF angular contact ball bearings
- Bearings
- 0692314449189
- 15 mm x 32 mm x 9 mm SNR MLE7002HVUJ74S angular contact ball bearings
- SCHAEFFLER GROUP
- Bearings