angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
- 20 mm x 37 mm x 9 mm SNFA VEB 20 7CE3 angular contact ball bearings
- Single Row | Angular
- 5.197 Inch | 132 Mil
- 140 mm x 250 mm x 42 mm SKF S7228 ACD/P4A angular contact ball bearings
- Not Applicable
- Shaft Mount
- 38 mm x 71 mm x 39 mm NSK 38BWD22 angular contact ball bearings
- 2 Bolt Pillow Block
- Pillow Block Bearing
- 190 mm x 400 mm x 78 mm NTN 7338DT angular contact ball bearings
- Roller Bearings
- N/A
- 65 mm x 100 mm x 18 mm NSK 65BER10H angular contact ball bearings
- 2.1460 in
- ISO-GARD® Small
- 50 mm x 90 mm x 30,2 mm PFI 5210-2RS C3 angular contact ball bearings
- 8483.20.40.80
- Concentric Collar
- 65 mm x 120 mm x 23 mm CYSD 7213CDT angular contact ball bearings
- 087796314702
- 23 mm
- 50 mm x 72 mm x 12 mm SNR ML71910HVUJ74S angular contact ball bearings
- Double Row
- 3.37 Inch | 85.598 M
- 120 mm x 215 mm x 40 mm NACHI 7224B angular contact ball bearings
- Bearings
- BUNTING BEARINGS
- 35 mm x 47 mm x 7 mm CYSD 7807C angular contact ball bearings
- TIMKEN
- Medium Series