angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
- 55 mm x 120 mm x 29 mm NTN 7311BDF angular contact ball bearings
- FAG BEARING
- Bearings
- 95 mm x 200 mm x 45 mm CYSD 7319BDF angular contact ball bearings
- ABB MOTORS AND MECHA
- DODGE
- 30 mm x 72 mm x 19 mm SKF 7306 BEGAPH angular contact ball bearings
- Double Row
- 0 Inch | 0 Millimete
- 160 mm x 290 mm x 48 mm ISB QJ 232 N2 M angular contact ball bearings
- 546 lb
- Female Threaded
- 165,100 mm x 177,800 mm x 6,350 mm NTN KXA065 angular contact ball bearings
- Metric
- 8482.10.50.68
- 60 mm x 130 mm x 54 mm FBJ 5312-2RS angular contact ball bearings
- 60 mm x 130 mm x 54 mm
- 80 mm x 140 mm x 26 mm SKF QJ216N2MA angular contact ball bearings
- 2-1/16 in
- 2-3/4 in